User manual

COMMUNICATION PROTOCOL
C
115
C.4 CONFIGURING THE TERMINAL (SERIAL COMMAND “S”)
Configure Formula terminal communication parameters by choosing the items Tools -
Options from the main menu of the EasyGen™. You can edit the configuration by
using the serial command “S”.
Command data must have the following structure:
The parameters that must not be edited, must in any case be included in the
command data with the value unchanged.
NOTE
In the following tables the default values are placed in a square.

Baud rate
VALUE SERIAL COMMAND
300 0 = 30
16
600 1 = 31
16
1200 2 = 32
16
2400 3 = 33
16
4800 4 = 34
16
9600
5 = 35
16
19200 6 = 36
16
This parameter allows you to set the transmission speed.