User manual

EASYGEN™
6
74
6.3 DELETION OF THE APPLICATION PROGRAM
CAUTION
The procedure described below will entail the deletion of the
data acquired and of the application software even if the
procedure is not completed.
If the application is to be changed, it is necessary to first delete the application
currently in use as indicated below.
1- Press <SCAN> and the protected
RESET key simultaneously; the
display screen will show:
2- To proceed with the deletion, press
the ▲ key; after a few seconds, the
display screen will show:
Now, you can load another
application program using either
EasyGen™ (see par. 4.2.7) or
DOSDL.EXE (see Appendix B).