User manual

F7400 - USER MANUAL _________________________________________________________
6
Ed.: 06/00
52
By pressing the [SHIFT]-[ESC] keys, the cursor is replaced
with a BATT icon that represents the battery's charge
state or the
A
C
character that indicates the terminal has
been inserted into the cradle. The codes used are from
251 to 255. If the sequence [SHIFT]-[ESC] is repeated,
the system returns to the previous cursor.
Since the cursor can only indicate one state or character
at a time, when more than one cursor indication is
enabled the priority from higher to lower is:
- Show the currently selected symbol or character key
(SHIFT mode) from the three possible selections
- Show the battery state
- Show the keyboard state
- Show the DOS cursor
For example:
When in BATT mode, loading a new font may affect the
cursor shape.
EVENT CURSOR
1. Power up
shows standard DOS
cursor
2. Press [SHIFT]-[SP] (enable) shows keyboard state
3. Press [SHIFT]-[ESC]
(enable)
shows battery level
icon
4. Press [SHIFT]-[7] shows A
5. Press [7] shows B
6. Wait for 2 second timeout
shows battery level
icon
7. Press [SHIFT]-[ESC]
(disable)
shows keyboard state
8. Press [SHIFT]-[SP] (disable)
shows standard DOS
cursor
SHIFT
ALT
ESC
SHIFT
ALT
ESC