User manual

F7400 - USER MANUAL _________________________________________________________

Ed.: 06/00

❏CTRL MODE

The CONTROL mode is the same obtained by pressing

the [CTRL] key on a PC keyboard. On the F7400, it is

activated with the [SHIFT]-[FUNC] sequence from the

NORMAL mode.

The keyboard remains in this new mode only when the

next general key is pressed, then it returns to the

previous mode.

For example, to press the [CTRL]+[C] key from the

NORMAL mode, press the

[SHIFT]-[FUNC]-[SHIFT]-[7]-[7]-[7] keys in sequence.

For example, to press the [CTRL]+[F3] key, press the

[SHIFT]-[ FUNC]-[FUNC]-[3] keys in sequence

❏ALT MODE

The ALTERNATE mode is the same obtained by pressing

the [ALT] key on a PC keyboard. On the F7400, it is

activated with the [FUNC]-[SHIFT] sequence from the

NORMAL mode.

The keyboard remains in this new mode only when the

next general key is pressed, then it returns to the previous

mode.

For example, to press the [ALT]+[A] key from the

NORMAL mode, press the [FUNC]-[SHIFT]-[SHIFT]-[7] keys

in sequence.

For example, to press the [ALT]+[F1] key, press the

[FUNC]-[SHIFT]-[FUNC]-[1] keys in sequence.

To summarize:

- The [SHIFT]-[FUNC] sequence is equivalent to pressing the [CTRL] key on the AT

keyboard, and the combination is valid only for the next key pressed.

- The [FUNC]-[SHIFT] sequence is equivalent to pressing the [ALT] key on the AT

keyboard, and the combination is valid only for the next key.

- The activity of the [FUNC] and [SHIFT] keys is in mutual exclusion, and is always

valid in the [NORMAL], [ALT] and [CTRL] modes.

For example, the [FUNC]-[1] sequence is always the same as pressing the [F1]

key, whereas the [SHIFT]-[1] sequence is the same as pressing the [S] key,

independently of the ALT and CTRL status.

FUNC

CTRL

SHIFT

ALT

FUNC

CTRL

SHIFT

ALT