User`s manual

USE AND OPERATION

3.2 BARCODE SCANNING

When reading a barcode point the terminal laser beam at the code

from an appropriate distance and simultaneously press the

<SCAN> key. The beam emitted by the laser must completely

cover the barcode; the LED (and the acoustic signal, if activated)

will indicate if the scan was carried out correctly.

NO NO

OK OK

Figure 7 - F732-E Terminal Scanning a Barcode

NOTE

Throughout the operation of the application, the

battery icon

, and the time icon will always be

activated, the latter in accordance with the setting

of the terminal internal clock.