DS8100A-3002 QUICK REFERENCE GUIDE NOTE This manual illustrates a typical Local Lonworks network application. For more details refer to the DS8100A Reference Manual available on the CD. For complete scanner configuration using the Genius™ configuration program refer to the Help On Line. 821001265 (Rev.
DS8100A-3002 QUICK GUIDE UPDATES AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to: www.automation.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Collegarsi a: www.automation.datalogic.com F Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Cliquez sur : www.automation.datalogic.
DS8100A-3002 QUICK GUIDE DS8100A-3002 GENERAL VIEW 1 Figure A 1 Laser Beam Output Window 1 7 2 3 4 5 6 Figure B 1 Programming Keypad 5 TX Data LED (Green) 2 Power On LED (Green) 6 Network LED (Red) 3 Phase On LED (Yellow) 7 LCD Display 4 Encoder LED (Yellow) 2 1 Figure C 1 Lonworks 17-pin Male Connector 2 Lonworks 17-pin Female Connector 3
DS8100A-3002 QUICK GUIDE CONNECTIVITY Local Lonworks Network Host HUB ETHERNET CAB-SC6103 Cable SC6000 AUX VAC INPUT Power/Net CAB-SC6013 PWO CAB-SC6003 Extended I/O LONWORKS ENCODER BTK-8500 Bus Return CAB-85xx PS PS Aux CAB-85xx CAB-85xx A CAB-85xx CAB-85xx C E DS8100A-3002 DX8200A-3002 G DX8200A-3002 DS8100A-3002 CAB-85xx CAB-85xx B CAB-85xx D DX8200A-3002 BTK-8500 Bus Return F DS8100A-3002 H DX8200A-3002 DS8100A-3002 Large Synchronized Network with DX8200A and DS8100A Sca
DS8100A-3002 QUICK GUIDE to Host ETHERNET SC6000 VAC INPUT CAB-SC6103 AUX Working Controller Power/Net CAB-SC6013 PWO CAB-SC6003 Extended I/O LONWORKS ENCODER CAB-85xx PS PS Aux CAB-85xx CAB-85xx A CAB-85xx E C DX8200A-3002 BTK-8500 DS8100A-3002 DX8200A-3002 G DS8100A-3002 Redundancy CAB-PWO 03 to Host ETHERNET VAC INPUT SC6000 Power/Net CAB-SC6013 PWO CAB-SC6003 Extended I/O Protecting Controller LONWORKS ENCODER CAB-85xx CAB-85xx CAB-85xx B DX8200A-3002 PS PS Aux D DS8100A-
DS8100A-3002 QUICK GUIDE E D B C F G SC6000 Working H Conveyor SC6000 Protecting A PWO PWO Example Redundant Reading Station ELECTRICAL CONNECTIONS Two 17-pin connectors provide access to the scanner’s local Lonworks network used for both input and output connections to build a multi-sided or omni-station system. 17-pin Lonworks Connector Pinout Pin A1 A2 6 Name GND VS 1 CHASSIS 2 n.c.
DS8100A-3002 QUICK GUIDE APPENDIX TECHNICAL FEATURES ELECTRICAL FEATURES Supply Voltage Power Consumption Communication Interfaces OPTICAL FEATURES Light Receiver Safety Class Wavelength Laser Control Auxiliary RS232 Other Lonworks 20 to 30 Vdc 20 W typical 1.3 to 0.9 A max. (including startup current) Baud Rate 1200 to 115200 1.25 Mb/s Avalanche photodiode 630 to 680 nm Class 2-EN 60825-1; Class II-CDRH Security system to turn laser off in case of motor slow down READING FEATURES Scan Rate Max.
DS8100A-3002 QUICK GUIDE ACCESSORIES Name Description Part Number Power Supply PWO-480 Power and Connect System 480W 93ACC1767 Cables and Terminators BTK-8100 BTK-8500 CAB-8100 CAB-8101 CAB-8102 CAB-8105 CAB-8501 CAB-8502 CAB-8505 Bus Terminator Kit (5 pcs) IP65 Terminator Kit (2 pcs) 10 wire shielded cable D 9.5 mm – 50 m 17-pin scanner/scanner connection cable 1.2 m 17-pin scanner/scanner connection cable 2.
DS8100A-3002 QUICK GUIDE MECHANICAL INSTALLATION 127 [4.98] DS8100A-3002 can be installed to operate in any position. There are 16 screw holes (M6 X 8) on the sides of the scanner for mounting. The following diagrams give the overall dimensions of the reader standard model and mounting bracket. They may be used for their installation: 173 [6.79] 47 [1.84] 45° 217 [8.54] 68 [2.66] 50 [1.97] M6 N°16 68 [2.66] 45° 47 [1.84] 50 [1.97] mm inch 164 5 [6.45] [1.18] 30 100 [6.45] [3.
DS8100A-3002 QUICK GUIDE READING DIAGRAMS Note: (0,0) is the center of the laser beam output window. DS8100A-3002 – 0.50 mm/20 mils CONDITIONS Code = Interleaved 2/5 or Code 39 PCS = 0.
DS8100A-3002 QUICK GUIDE COMPLIANCE See the DS8100A Reference Manual for the Declaration of Conformity. LASER SAFETY 3 2 1 Figure A 1 Laser Safety Label 3 Identification Label 2 Warning and Device Class Label The scanner is classified as a Class 2 laser product according to EN60825-1 regulations and as a Class II laser product according to CDRH regulations. Disconnect the power supply when opening the device during maintenance or installation to avoid exposure to hazardous laser light.
DS8100A-3002 QUICK GUIDE FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation.
