Installation manual

RAPID CONFIGURATION
17
1
ADVANCED SCANNER CONFIGURATION
The ADVANCED selection available when starting the Genius™ program is addressed to
expert users being able to complete a detailed scanner configuration. By choosing this option
it is possible either to start a new scanner configuration or to open and modify an old one.
The desired parameters can be defined in the following window, similar to the MS Explorer:
Figure 13 - Genius™ Parameter Explorer Window
Host Mode Programming
The scanner can also be configured from a host computer using the Host Mode
programming procedure, by commands via the serial interface. See the Host Mode
Programming file on the CD-ROM.
Alternative Layouts
 The ID-NET™ network is a built-in high-speed interface dedicated for high-speed
scanner interconnection. ID-NET™ is in addition to the Main and Auxiliary serial
interfaces. If you need to install an ID-NET™ network refer to the DS4800 Reference
Manual.
The scanner can also be configured by reading programming barcodes. See the "Setup
Procedure Using Programming Barcodes" printable from the CD-ROM.
 If you need to install an Ethernet network, Fieldbus network, Pass-Through network,
Multiplexer network or an RS232 Master/Slave network refer to the DS4800 Reference
Manual.