Installation manual

RAPID CONFIGURATION

STEP 4 – X-PRESS™ CONFIGURATION

X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of

installation and maintenance.

Status and diagnostic information are clearly presented by means of the five colored LEDs,

whereas the single push button gives immediate access to the following relevant functions:

 AutoSetup to self-optimize and auto-configure

reading performance in demanding applications

 AutoLearn to self-detect and auto-configure for

reading unknown barcodes (by type and length)

 Focus Lock to memorize the mechanical focus

position

 Test Mode with bar graph visualization to check

static reading performance

The colors and meaning of the five LEDs are illustrated in the following table:

LED Color Description

READY Green

This LED indicates the device is ready to operate. For Subzero

models this LED blinks during the warm-up phase.

GOOD Green

This LED confirms successful reading.

TRIGGER Yellow

This LED indicates the status of the reading phase. *

COM Yellow

This LED indicates active communication on main serial port. **

STATUS Red

This LED indicates a NO READ result.

* In On-Line mode the TRIGGER LED corresponds to the active reading phase signaled by the Presence Sensor.

In Automatic and Continuous modes the TRIGGER LED is always on indicating that the reader is ready to read a

code.

** When connected to a Fieldbus network through the CBX500, the COM LED is always active, even in the

absence of data transmission, because of polling activity on the Fieldbus network.

During the reader startup (reset or restart phase), all the LEDs blink for one second.

On the back of the reader near the cable, the “POWER ON” LED indicates the laser scanner

is correctly powered.

NOTE

When entering the X-PRESS™ interface on the DS4800-X1XX the

Oscillating Mirror remains in the default fixed position (0°) in order to make

barcode reading easier while performing the X-PRESS™ functions.