Installation manual

DS1100 DATALOGIC
2.2 - Installation
2.2 MECHANICAL INSTALLATION
DS1100 can be installed to operate in any position.
There are three screw holes (M3 x 5) on the body of the reader for mounting.
The diagram below gives all the information required for installation; refer to
par. 2.4 for correct positioning of the scanner with respect to the code
passage zone.
DS1100
mm
inch
M3 n°3
80
3.15
64.3
2.53
4
0.16
4
0.16
7.7
0.3
6
0.24
61
2.4
22.5
0.89
15.4
0.61
50
1.97
A
B
MOUNTING BRACKET
Figure 2.2 - DS1100 overall dimensions