Installation manual

DATALOGIC DS1100
General Features - 1.1
1 GENERAL FEATURES
1.1 INTRODUCTION
The DS1100 scanner with decoder offers the best cost-effective solution for
demanding industrial applications.
The DS1100 ultra compact dimensions, based on Datalogic's experience in
miniaturised laser components, have been specifically designed to make the
scanner's integration into automated equipment extremely easy.
The Windows-based user-friendly WinHost utility program provided on
diskette simplifies the scanner’s setup. The DS1100 can also be configured
from a Host PC through the Host Mode procedure.
1.2 DESCRIPTION
Some of the main features of DS1100 are listed below:
•
miniaturised dimensions, light weight.
•
scanning speed: 350 scans/sec.
•
raster version available.
•
2 serial communication interfaces: RS232 + RS485.
•
reads all popular codes.
•
supply voltage: 5 Vdc ( 4 to 30 Vdc with converter).
•
test mode to verify the reading features and exact positioning of the
scanner without the need for external tools.
•
programmable in 4 different operating modes to suit the most various
barcode reading system requirements.
•
code verifier.
•
programmable input and output signals.
•
light source: visible laser diode; the light emitted has a wave length of
630
∼
680 nm. For laser safety precautions refer to the “Safety
Precautions” section at the beginning of this manual.
•
low power consumption.
•
IP65 protection class of the enclosure; the reader is therefore suitable for