User manual

Enter/Exit Programming Mode Label ID

Gryphon™ I GD44XX

GBT4400

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-

0xFF), used to identify a bar code (symbology) type. It can be appended previous to or

following the transmitted bar code data depending upon how this option is enabled. This

feature provides options for configuring custom Label IDs or individually per symbology (see

"Individually Set Label ID" on page 77). If you wish to program the reader to always include an

industry standard label identifier for ALL symbology types, see the previous feature "Global

AIM ID" on page 73.

See Label ID, starting on page 263 of “References” for more information on setting this feature.

Label ID: Pre-Loaded Sets

The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded Sets, starting on

page 263 for details on the USA set and EU set.

CAUTION

$AE(CR)

Label ID Pre-loaded Set = USA Set

$Ae(CR)

Label ID Pre-loaded Set = EU Set

DEFAULT

When changing from one Label ID set to another, all other reader

configuration settings, including the host interface type, will be

erased and set to the standard factory defaults. Any custom config-

uration or custom defaults will be lost.