User manual

Enter/Exit Programming Mode

Gryphon™ I GD44XX

GBT4400

ACK Character

This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII

characters or any hex value from 0 to 0xFF can be selected. See page 250 for more information.

$CR2AC

Select ACK Character Setting

DEFAULT

0x06 ‘ACK’ Character

Setting to previously defined characters such as XON, XOFF, or host com-

mands conflicts with normal operation of these characters. 8-bit data is not

rec

ognized when the option

Data Bits

has been set as 7 Data Bits.

NAK Character

This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII

characters or any hex value from 0 to 0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host com-

mands conflicts with normal operation of these characters. 8-bit data is not

recogniz

ed when the option

Data Bits

has been set as 7 Data Bits.

See page 251 for more information.

$CR2NA

Select NAK Character Setting

DEFAULT

0x15 ‘NAK’ Character