Manualshelf

User manual

ManualsBrandsDATALOGIC ManualsScanners2D wireless barcode scanner Gryphon GBT 4400 USB-Kit Imager Black Hand-held Bluetooth, USB
41424344454647484950
Enter/Exit Programming Mode
46
Gryphon™ I GD44XX
/
GBT4400
Beep On ASCII BEL
When this parameter is enabled, the reader issues a beep when a <BEL> character is detected on
the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal entry or other
important event.
$CR2BB00(CR)
Beep On ASCII BEL = Disable
DEFAULT
$CR2BB01(CR)
Beep On ASCII BEL = Enable
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
$CBPNF00(CR)
Beep On Not On File = Disable
DEFAULT
$CBPNF01(CR)
Beep On Not On File = Enable