User manual

Customizing Configuration Settings
Product Reference Guide 33
Replacing the Battery
Before replacing the Battery, read "Battery Safety" starting on page 13 . Datalogic recommends
annual replacement of rechargeable battery packs to ensure maximum performance.
To change the battery of your reader, complete the following instructions.
1. With a screwdriver, unscrew the battery cover screw.
2. Unscrew and remove the three screws securing the battery holder, and unplug the white
connector.
Screw
Screw
Screw
Connector
3. Carefully lift out the gold contacts circuit, and remove the battery holder while letting the
white connector pass through the hole in the battery holder (as shown in the picture
below).
Pass-through
hole