User manual

Product Reference Guide 291
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for featur
e descriptions and programming bar codes for each
parameter. A column has also been provided for recording of your preferred
default settings for
these same configurable features.
Table 52. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 37
USB Suspend Mode
Disable 37
RS-232 ONLY
Baud Rate
9600 40
Data Bits
8 Data Bits 41
Stop Bits
1 Stop Bit 41
Parity
None 42
Handshaking Control
RTS 43
RS-232/USB-Com
Intercharacter Delay
No Delay 45
Beep On ASCII BEL
Disable 46
Beep On Not on File
Enable 46
ACK NAK Options
Disable 47
ACK Character
‘ACK’ 48
NAK Character
‘NAK’ 48
ACK NAK Timeout Value
200 ms 49