User manual

Configuring the Base Station

Product Reference Guide

Linking to a PC in Client Mode (BT Master Mode)

The reader can optionally be linked in client mode to a Bluetooth-enabled PC with the serial

port profile. To do this, follow these steps:

1. Ensure the PC or terminal can network with B

luetooth

devices and that it is powered on.

2. Ensure that a COM port is assigned under Services within the Bluetooth setup menu.

3. Create a Link label that contains the address of the

PC Bluetooth adapter.

NOTE

The Bluetooth address can be found under "Properties" within in the

Bluetooth setup menu.



The link label is a Code 128 function 3 label with the following format:

<FN3 char>LnkB<12 c

haracter Bluetooth address>

4. Scan the link label you created in step 3.

Power Off

Shuts off power to the BT handheld until next trigger pull. This function only applies to the BT

model.

Stand Alone Layouts

Figure 12. Single Reader Layout