User manual

Enter/Exit Programming Mode
246 Gryphon™ I GD44XX / GBT4400
Motion Sensitivity
Defines discrete set of levels for scanner motion sensitivity when in handheld use.
$CMOSY00(CR)
Motion Sensitivity = Low
$CMOSY01(CR)
Motion Sensitivity = Medium
DEFAULT
$CMOSY02(CR)
Motion Sensitivity = High
Motionless Timeout
Specifies the waiting time in 100 millisecond ticks to assume that the reader is in a motionless
condition. The selectable range is 500 msec to 25.5 Seconds. When no motion event is detected
for a period of time longer than this timeout, the software assumes the reader is in a motionless
condition. This normally results in returning the scanner to Stand Mode.
$CMOTO14\r
Set Motionless Timeout = 2 seconds
DEFAULT
$CMOTO32\r
Set Motionless Timeout = 5 seconds
$CMOTO64\r
Set Motionless Timeout = 10 seconds