User manual

Enter/Exit Programming Mode
242 Gryphon™ I GD44XX / GBT4400
BT PIN Code
After enabling Security Mode (see "BT Security Mode" on page 241), specify whether you want
to set a 4-digit or a 16-digit PIN Code. See page 280
for detailed information and examples for
setting this feature.
$CBTPC\r
Select 4-character BT PIN Code
$CBTP6\r
Select 16-character BT PIN Code
Select PIN Code Length
Set PIN Code
Determine the desired characters for the PIN code, then convert to hexadecimal using the
ASCII Chart on the inside back cover of this manual. See page 28
0 for detailed information and
examples for setting this feature.
$CBTPS00\r
Set 4-character BT PIN Code
To configure this feature, scan
the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
lef
t followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar
code again.
~$CBTPS01\r
Set 16-character BT PIN Code
~
CANCEL
Make a mistake? Scan the CANCEL bar code to
abort an
d not save the entry string. You can then
start again at the beginning.
DEFAULT
31323334 = Default PIN Code is 1234