User manual

Micro PDF417 Enter/Exit Programming Mode
Product Reference Guide 217
Micro PDF417 Set Length 2
This feature specifies one of the bar code lengths for Micro PDF417 Length Control. Length 2
is the maximum label length if in Variable Length Mode, or the second fixed len
gth if in Fixed
Length includes the barcode’s data characters only. Characters can be set from 0001 to 0366
characters (pad with zeroes) in increments of 01. Any value greater than 0366 will be considered
to be 0366.
See page 259 for detailed instructions on setting this feature.
$CMIL2
Select Micro PDF417 Length 2 Setting
To configure this feature, scan th
e ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
lef
t followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
barc
ode again.
Make a mistake? Scan the CANCEL bar code to abort
and not sav
e the entry string. You can then start again at
the beginning.
~
CANCEL
DEFAULT
Length 2 is 0366 Characters