User manual

Setup

Gryphon™ I GD44XX

GBT4400

3. The stand can now be repositioned in either horizontal or standing position.

Horizontal

Standing

Connecting the Base Station

Figure 7 shows how to connect the Base Station to a terminal, PC or other host device. Turn off

the host before connection and consult the manual for that equipment (if necessary) before

proceeding.

Connect the interface cable before applying power to the Base Station.

The Gryphon GBT4400 can be set up to require a PIN code when con-

necting to the host. If you are connecting to a system tha

t uses a custom

security PIN, follow the procedure in "Connecting the Base when Secu-

rity Pin is Enabled" on page

. For information on how to configure this

feature, see

"BT Security Mode" starting on page 241

Base Station Connection and Routing:

Fully insert the Power Cable and Interface (I/F) Cable

connectors into their respective ports in the underside of the Base Station (see Figure 7). Then

connect to an AC Adapter, and plug the AC power cord into the (wall) outlet.

Gryphon Wireless can also be Powered by the Terminal. The external power supply

is recommended but not necessary. When powered by the Terminal, the battery

charger is automatically set as Slow charge.