User manual

Enter/Exit Programming Mode Data Matrix
208 Gryphon™ I GD44XX / GBT4400
Data Matrix Set Length 2
This feature specifies one of the bar code lengths for Data Matrix Length Control. Length 2 is
the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed
Length Mode. Characters can be set from 0001 to 3,116 characters in increments of 0001 (pad
with zeroes).
See page 259 for detailed instructions on setting this feature.
$CDML2
Select Data Matrix Length 2 Setting
To configure this feature, scan
the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
lef
t followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar
code again.
Make a mistake? Scan the CANCEL bar code to abort
and not sav
e the entry string. You can then start again at
the beginning.
~
CANCEL
DEFAULT
Length 2 is 3,116 Characters