User manual

Enter/Exit Programming Mode China Sensible Code

204

Gryphon™ I GD44XX

GBT4400

China Sensible Code

Set Length 1

Specifies one of the bar code lengths for China Sensible Code Length Control. Length 1 is the

minimum label length if in Variable Length

Mode, or the first fixed length if in Fixed Length

Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001 (pad with

zeroes).

See page 259 for detailed instructions on setting this feature.

$CCSL1

Select China Sensible Code Length 1 Setting

To configure this feature, s

the ENTER/EXIT PRO-

GRAMMING MODE barcode above, then the barcode at

lef

t followed by the digits from the Alphanumeric char-

acters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar

code again.

Make a mistake? Scan the CANCEL bar code to abort

and not sav

e the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character