User manual

Enter/Exit Programming Mode 1D Code Selection

196

Gryphon™ I GD44XX

GBT4400

Plessey Set Length 2

This feature specifies one of the bar code lengths for Plessey Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length

Mode. Length includes the bar code’s check, data, and full-ASCII shift characters. The

length

does not include start/stop characters.

The length can be set from 1 to 50 characters. A setting of

0 specifies to i

gnore this length (only

one fixed length).

Table 24 provides examples for setting Length 2. See page 259 for detailed instructions on

setting this feature.

Table 24. Plessey Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Leng

th)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT PLESSEY LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CPLL2

Select Plessey Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters