User manual

Enter/Exit Programming Mode 1D Code Selection

160

Gryphon™ I GD44XX

GBT4400

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for Industrial 2 of 5 Length Control. Length 1

is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed

Length Mode. Length includes the bar code’s data characters only. The length can be set from 0

to 50 characters.

ble 11 provides some examples for setting Length 1. See page 259 if you want detailed

instructions on setting this feature.

Table 11. Industrial 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting 00 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CU2L1

Select Industrial 2 of 5 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Character