User manual

Enter/Exit Programming Mode 1D Code Selection

156

Gryphon™ I GD44XX

GBT4400

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for Standard 2 of 5 Length Control. Length 1

is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed

Length Mode. Length includes the bar code’s check and data

characters. The length can be set

from 1 to 50 characters.

Table 9 provides some examples for setting Length 1. See page 259 if you want detailed

instructions on setting this feature.

Table 9. Standard 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CS2L1

Select Standard 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

08 = Length 1 is 8 Characters