User manual

Enter/Exit Programming Mode 1D Code Selection

152

Gryphon™ I GD44XX

GBT4400

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for I 2 of 5 Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length

Mode. The length includes the bar code’s check and data characters.

The length can be set from 2 to 50 characters. A setting of 0 specifies to i

gnore this length (only

one fixed length).

Table 8 provides examples for setting Length 2. See page 259 for detailed instructions on setting

this feature.

Table 8. I 2 of 5 Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

Ignore This

Length

4 Characters 14 Characters 50 Characters

Pad with leading zeroes to

yield two digits

00 04 14 50

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT I 2 OF 5 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘4’ ‘1’ and ‘4’ ‘5’ AND ‘0’

6 Scan ENTER/EXIT PROGRAMMING MODE

$CI2L2

Select I 2 of 5 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters