User manual

Introduction

Gryphon™ I GD44XX/GBT4400

The BC40xx™ Radio Base

Base LEDs

LEDs on the Gryphon Base provide information about the Base’s status, as shown in Figure 1.

Figure 1

YELLOW LED

RED LED /

GREEN LED

BUTTON

. Gryphon Base LEDs

The following table describes the significance of each LED:

LED STATUS

Power on / Data

Yellow On = Base is powered

Yellow Blinking = Base receives data and 

commands from the Host or the Reader.

Charging Red On = Battery charging is in progress.

Charge completed Green On = the Battery is completely charged.

Charging + Charge completed

Red and Green Blinking together = the Reader is not

orrectly placed onto the Base.

See Base Station Indications (GBT4400 Models ONLY) on page 289 for more specific details on the

LEDs.

Base Button

The Base contains a button which is used primarily to perform a paging function. Pressing the

button causes a sound signal to be emitted by all scanners linked with this Base, as long as the

scanner is awake (see Powerdown Timeout on page 244) and reception is enabled (see LED and

Beeper Indicators on page 88). The button can also be used to "force device connection" via the

Datalogic Aladdin Software tool (available for free download from the Datalogic website). See

the Aladdin Online Help for

details.

For the BT model, press quickly (less than one second) to initiate paging. Press and hold (longer

than one second) to enable

radio linking. This will make the base discoverable from a BT

master.