User manual

About the Reader
Product Reference Guide 11
About the Reader
Typically, units are factory-programmed for the most common terminal and communications
settings. If you need to modify any programmable settings, custom configuration can be
accomplished by scanning the programming bar codes within this guide.
Two models of the Gryphon 2D are available, and are covered in this manual:
• Gryphon I GD44XX - Corded 2D imager bar code reader
•
Gryphon I GBT4400 - Model with B
luetooth options.
Programming can alternatively be performe
d using the Datalogic Aladdin™ Configuration
application which is downloadable from the Datalogic website listed on the back cover of this
manual. This multi-platform utility program allows device configuration using a PC. It
communicates to the device using a serial or USB cable and can also create configuration bar
codes to print.
Advancements in the LED technology used in the imager-based readers significantly improve
the
illumination
of the target field of view, resulting in higher scan efficiency. Whether used in
Single Trigger or Continuous Mode, the ergonomic design of the reader will help to promote
comfortable handling during extended periods of use.
See "Interface Selection" on page 27 for a listing and descriptions of available interface sets
by
model type.