User manual

Enter/Exit Programming Mode
102 Gryphon™ I GD44XX / GBT4400
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature is
enabled, you will be unable to read normally-printed labels or programming labels in this
manual. Scan the “Disable” barcode below to return the scanner to its default for this feature.
To set the reader to decode only 2D codes, go to 2D Normal/Inverse Symbol Control" on page
199.
For additional options, see the Aladdin conf
iguration application.
CAUTION
$P,CIPVR00,P(C
R)
Decode Negative Image = Disable
DEFAULT
$P,CIPVR01,P(CR)
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Unlike some programming features and options, Decode Negative Image selec-
tions require that you scan only one programming bar code label. DO NOT scan
an ENTER/EXIT ba
r code prior to scanning a Decode Negative Image bar code.
Image Capture
For information and a list of options for Image Capture, use the Datalogic Aladdin
configuration application, available for free download from the Datalogic Scanning website.