User manual

Enter/Exit Programming Mode
96 Gryphon™ I GD44XX / GBT4400
High Motion Immunity
This option enables/disables the ability of the reader to activate immunity to label motion when
in Stand Mode.
DEFAULT
$CMOSI00(CR)
High Motion Immunity = Disable
$CMOSI01(CR)
High Motion Immunity = Enable
Stand Mode Illumination Off Time
Specifies the amount of time reader illumination stays off after pulling the trigger when in Stand
Mode. The configurable range is 01 to 32 by 01 in increments of 500ms (500ms to 16 seconds).
See page 272 in “References” for a description of this feature.
$CSNTM
Select Stand Mode Time Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
lef
t followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar
code again.
DEFAULT
04 = 2 Seconds