User manual
Connecting the Base Station
12 Gryphon™ I GBT4400
Using the BC40xx™ Radio Base
Radio Base LEDs
LEDs on the Gryphon Base provide information about the
Base as well as battery charging status, as shown in Figure 7.
Figure 7. Gryphon Base LEDs
Table 1. Radio Base LEDs
The button can be used to force device connection via the
Datalogic Aladdin Software tool, to force a BT disconnect,
and for paging the scanner when it is activated. Refer to the
Gryphon I GBT4400 Product Reference Guide (PRG) for a
more detailed explanation.
LED STATUS
Power on /
Data
Yellow On = Base is powered
Yellow Blinking = Base receives data
and commands from the Host or the
Reader.
Charging Red On = the Battery is charging.
Charge com-
pleted
Green On = the Battery is completely
charged.
Charging +
Charge com-
pleted
Red and Green Blinking together = the
Reader is not correctly placed onto the
Base.
YELLOW LED
RED LED —
GREEN LED
BUTTON