Quick Start Guide

Power the Dock
Use only the Datalogic power supply 94ACC0197 to power the
dock.
CAUTION
Charge the Memor 10
Insert the device into the dock with the screen facing front and the head
facing up.
The dock is able to provide wireless power to the Memor 10 when the
device is correctly inserted.
.
Make sure there is nothing between the dock and the device.
Do not put any foreign object such as, but not limited to, coins,
paper clips, stickers inside the slot of any of the docks.
Do not apply any sticker to the Memor 10 (see the examples
below).
CAUTION
Do not attempt to charge any other device different from the
Memor 10 devices.
WARNING
LED Indicators
LED Behavior Operation Status
Power ON
Solid green Dock is powered
Foreign Object Detection (FOD)
Blinks red slow at 0.625Hz Foreign object detected, output power is
reduced.
Blinks red fast at 2.5Hz Foreign object detected, output power is further
reduced.
Solid red Foreign object detected, output power is
disabled.
In case of FOD led blinking, remove the foreign object.
CAUTION
Technical Specifications
Electrical Features
Indicators Consumption Power on LED (green)
FOD LED (red)
Environmental Features
Working Temperature 0°C to 40°C
Storage Temperature -30°C to 70°C
Humidity 5-95% non condensing
Mechanical Features
Dimensions 104 x 126 x 297 mm / 4.09 x 4.96 x 11.69 in
Weight 725 g / 25.57 oz