User`s manual

DL TCL™
2
1
1.1.1 DL TCL™ Operating Modes
DL TCL™ can be used for radio transmission with an Host or with a "Keep
Connecting" PC which is connected to a remote Host through a network connection:
- Direct Host Mode
- Keep Connecting (KC) Mode
In "Direct Host Mode" DL TCL™ runs on an RF terminal in VTxxx or IBM5250/3270
Telnet emulation which communicates via radio with a Host PC selected from a list of
up to 5 Hosts (Multi-Host functionality). If the list contains just a single Host, simply
press the terminal ENTER key to directly connect to it.
The terminal can be configured by setting the DL TCL™ configuration menus.
Figure 1 - Direct Host Mode
In "KC Mode" DL TCL™ interacts with the DL Keep Connecting™ installed in a
"Keep Connecting" Host PC communicating with a remote Host by means of a
network connection (refer to the related manual for details). The configuration files
can be saved and sent via radio to the terminal loading the FTP protocol. The
programs required for terminal remote configuration and its radio transmission are
provided within the DL Mobile Configurator™ Enterprise 2 package.
Figure 2 - Keep Connecting Mode
KC Host PC