User`s manual

DL TCL™
56
6
Error Message Description
Parameters changed. Save
changes? (Y/N)
If exiting the main setup menu after changing
some parameters, the terminal prompts for
confirmation before updating the values.
Wait…(saving changes)
The terminal asks to wait while saving the new
configuration values.
WARNING! Default Parameters
changed. If you save you need
to reboot. Save changes? (Y/N)
The configuration of specific parameters, such
as IP Address and Radio parameters, requires
the terminal reboot to be activated. By saving
the changes, all the new configuration values
will be saved and the terminal rebooted.
Changed. System will be
reboot…
The terminal is saving new data and it will be
rebooted.
Connection closed by remote
host. Warning! Session Closed
by Remote Host.
The connection has been terminated by the
remote host.
NOT AVAILABLE CONNECTION
The connection is not available because it has
been terminated by the remote host.
This message appears only when working in
Multi-Mode connection with a session still
active.
Error on GetSocket. Emulation
aborted…
A fatal error has occurred in the TCP/IP
management. It is necessary to reset the
terminal.
Warning! Machine not enabled
to open *.INI file. Press any key
to Continue.
At startup the program did not find the required
configuration files.
Warning! Error on *.cfg file.
Press any key to Continue.
An error has occurred on reading the
configuration files. One or more parameters
might not be configured correctly.
Host Disconnected…
If you want Escape press ESC
else the System tries to
Reconnect in about 3 seconds...
This message appears only when the Autorun
parameter (Emulation menu) is enabled. It
signals that the terminal has been
disconnected from the Host PC or the session
has been terminated. It will try to reconnect
within 3 seconds…
If a new connection attempt is not required, it
may be skipped by pressing the [ESC] key.