User`s manual

DL TCL™ EXTENDED COMMANDS
39
4
 IEEE802.11 Radio
Datalogic - SETUP
Network Radio
1) Open Air
2) IEEE 802.11b
3) IEEE 802.11
ENTER to Continue
Datalogic - SETUP
Symbol 802.11 2Mb
1) ESS_ID
2) Power Options
ENTER to Continue
"3"
[ENTER]
"2"
"1"
[ENTER]
Datalogic - SETUP
Symbol 802.11 2Mb
- ESS_ID Network Name:
ENTER to Continue
Datalogic - SETUP
Symbol 802.11 2Mb
1) Enable Pwr Save
2) Disable Pwr Save
ENTER to Continue
[ENTER]
Figure 44 – IEEE802.11 Radio Settings
Radio
Card Model
Settings
IEEE 802.11
Symbol Spectrum 24
- ESS ID = sets the Service Set Identifier or the specific
wireless network
- Power Options = turns on or off the Power Management
4.2.3 Connection
The Connection submenu allows defining the address of Host PC or Keep
Connecting PC communicating with the terminal.
The communication can be performed with the first Host PC of the Multi-Host list (see
par. 1.1) or up to 4 different Keep Connecting PCs.
"3"
[ENTER]
Datalogic - SETUP
Network Settings
1) TCP/IP
2) Radio
3) Connection
ENTER to Continue
Datalogic - SETUP
Network - Connection
1) Host
2) Keep Connecting
ENTER to Continue
Figure 45 – Connection Settings