User`s manual

DL TCL™
34
4
 DNS
The definition of the DNS IP address must respect the xxx.yyy.www.zzz structure,
where x, y, w and z are in the range 0-255:
Datalogic - SETUP
Network TCP/IP
- DNS Address:
ENTER to Continue
Figure 39 - DNS Mask
Once the DNS has been configured, logical names substituting the IP address may
be used by the Host PC to identify the devices.
 Device Name
This parameter allows assigning a name to the terminal performing the connection.
By inserting an (*) asterisk before the name (i.e.: "*Name"), the device name will
indicate the device name in the AS400 protocol (Variable: Device Name).
Datalogic - SETUP
Network TCP/IP
- Device Name:
ENTER to Continue
Figure 40 - Device Name Mask
This parameter can be used also for identification purpose when the terminal
communicates in KC Mode (see the DL Keep Connecting™ User's Manual for
details).
If the DNS parameter has been already set, it is not possible to define the Device
Name.