User`s manual

DL TCL™
4
2
Once the communication between the terminal and DL Mobile Configurator™
Enterprise 2 has been enabled, it is possible to start the downloading procedure by
clicking on the
icon available on the program toolbar.
2.1.1 DL TCL™ Installation Tree
Once the program has been installed correctly onto the terminal, all files dealing with
the program management will be placed into the following terminal directories:
C> ---+-- RF
|
+-- TN
|
+-- REMCONF
Figure 4 - Installation Tree
The RF directory contains all files dealing with the radio management. The file name
and dimension change according to the radio type installed on the terminal.
The TN directory contains the emulation program file Telxxxx.exe where:
xxxx = 9648 corresponds to Viper™ 48-key Models
9632 corresponds to Viper™ 32-key models
9700 corresponds to Rhino™ LCD
9700V corresponds to Rhino™ VFD
8600 corresponds to Kyman™
7400 corresponds to F7400
This directory also provides all configuration files:
- HOST.ini: terminal parameters and address of the Hosts the terminal can be
connected to;
- TCL.ini: terminal parameters (scanner, keyboard, font) and address of the KC PC
the terminal is connected to;
- Socket.cfg: terminal TCP/IP parameters (IP address, subnet, gateway, dns);
- Key.map: keyboard mapping parameters (optional).
The REMCONF directory contains all files defining the "KC Mode" (see the DL Keep
Connecting™ User's Manual for details).
To guarantee a correct remote configuration of the terminal, it is necessary to respect
the structure of the NEWAUTO.bat file installed on the terminal. The corruption or
omission of this structure may cause a wrong configuration downloading.