User Manual

Product Reference Guide 21
Chapter 3
Configuration Using barcodes
This and following sections provide programming barcodes to configure your
scanner by changing the default settings. For details about additional methods
of programming, see "
Customizing Configuration Settings" on page 13 .
NOTE
You must first enable your scanner to rea
d barcodes in order to use
this section. If you have not done this, go to
Setup, starting on page 5
and complete the appropriate procedure.
Configuration Parameters
Once the scanner is set up, you can change the default parameters to meet your
application needs. Refer to "
Resetting the Product Configuration to Defaults" on page
15
for initial configuration in order to set the default values and select the
interface for your application.
The following configuration parameters are divided into logical groups, making
it
easy to find the desired function based on its reference group.
Interface Configuration:
• "USB-COM Interfaces" on page 25
• "Keyboard Interface" on page 35
• "USB-OEM Interface" on page 65
Parameters common to all interface applications:
• " Global Prefix/Suffix" on page 68
• "
Data Format" on page 67 offers advanced configuration options for custom-
ization of scanned data output.
• "
Reading Parameters" on page 79 control various operating modes and indi-
cators status functioning.
Symbology-specific parameters:
"1D Symbologies" on page 105 defines options for all symbologies and provides
the programming barcodes necessary for configur
ing these features.
NOTE
You must first enable your scanner to read barcodes in order to use
this section. If you have not done this, go to
Setup, starting on page 5
and complete the appropriate procedure.