User Manual

Wireless Features Enter/Exit Programming Mode
Product Reference Guide 259
Erase Batch Memory
When the scanner is configured in Manual Batch Mode, use the following barcode to
erase any labels stored in batch memory.
Erase Batch Memory
Batch settings override Leash Mode beep settings.
It is strongly recommended to connect the reader with a micro USB cable to the
Host before
scanning the "Download Batch Queue" label or, if the base station is
available, to place the reader over the base just after the scan.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with
th
is barcode.
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch
memory.
DEFAULT
$CBTTD00(CR)
RF Batch Mode Transmit Delay = No Delay
$CBTTD05(CR)
RF Batch Mode Transmit Delay = 50 mS
$CBTTD0A(CR)
RF Batch Mode Transmit Delay = 100 mS