User Manual

Setup
18 RIDA™ DBT6400
Cleaning Procedure
Proper cleaning is needed on the external plastic surfaces, output window and
electrical contacts to guarantee reliable scanning and charging of the battery.
A regular cleaning routine will remove the dust and dirt that may accumulate on
the product over time. The maintenance activity may be repeated more fre-
quently depending on the severity of the environment in which the scanner is
use
d.
A periodic deeper cleaning is suggested once per month.
Cleaning plastic surfaces
Exterior plastic surfaces and scan windows exposed to spills, smudges or
debris require periodic cleaning to ensure best performance during scanning.
Use a soft, dry cloth to clean the product.
If the product is very soiled, clean the plastic surfaces with a soft cloth moist-
ened with a diluted non-aggressive cleaning solution or isopropyl alcohol (min-
imum 70%).
Recommended cleaners for standard plastics are:
Formula 409® glass and surface cleaner, dish soap and water, Windex® Original
(Blue).
Recommended cleaners for H
ealth care plastics:
CaviWipes™, diluted Clorox® bleach,Hepacide Quat® II,Sani-Cloth®,Virex® II
2
56.
CAUTION
Do not use abrasive or aggressive cleansing agents or abrasive pads to clean
scan windows, contacts or plastics.
Do not spray or pour liquids directly onto the unit.
Be sure to turn off power and unplug the dev
ice from electrical outlet before
cleaning.
Be sure to dry up the device
before powering it up.
Cleaner and liquids may be harsh on metal c
ontacts. They are recommended
for use only on enclosures.