User Manual

Symbology Selection Enter/Exit Programming Mode

Product Reference Guide

213

Micro PDF417 Set Length 2

This feature specifies one of the barcode lengths for Micro PDF417 Length

Control on page 212. Length 2 is the maximum label length if in Variable

Length Mode, or the second fixed length if in Fi

xed Length includes the bar-

code’s data characters only. Characters c

an be set from 0001 to 0366 charac-

ters (pad with zeroes) in increments of 01. Any value greater than 0366 will be

onsidered to be 0366.

See page 249 for detailed instructions on setting this feature.

$CMIL2

Select Micro PDF417 Length 2 Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE barcode above, then the barcode at

left followe

d by the digits from the Alphanumeric char-

acters in

Appendix D, Keypad

representing your

desired character(s). End by scanning the ENTER/EXIT

barcode again.

Make a mistake? Scan the CANCEL barcode to abort and

not save

the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

Length 2 is 0366 Characters