User Manual

Enter/Exit Programming Mode Data Matrix
204 RIDA™ DBT6400
Data Matrix Set Length 2
This feature specifies one of the barcode lengths for Data Matrix Length Con-
trol on page 203. Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length
if in Fixed Length Mode. Characters can be set
from 0001 to 3,116 characters in increments of 0001 (pad with zeroes).
See page 249 for detailed instructions on setting this feature.
$CDML2
Select Data Matrix Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/E
XIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
~
CANCEL
Length 2 is 3,116 Characters
DEFAULT