User Manual

Enter/Exit Programming Mode Aztec Code
198 RIDA™ DBT6400
Aztec Code Set Length 2
This feature specifies one of the barcode lengths for Aztec Code Length Control
on page 196. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Len
gth Mode. Characters can be set from
0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See page 249 for detailed instructions on setting this feature.
$CAZL2
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/E
XIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
~
CANCEL
Length 2 is 3,832 Characters
DEFAULT