User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 185
Code 93 Set Length 1
This feature specifies one of the barcode lengths for Code 93 Length Control on
page 184. Length 1 is the minimum
label length if in Variable Length on page
184 Mode, or the first fi
xed length if in Fixed Length on page 184 Mode. Length
includes the barcode’s da
ta characters only.
The length can be set from 01 to 50 characters. See "Set Length 1" on page 248
for more detailed programming instructions.
Select Code 93 Set Length 1 Setting
To configure this feature, scan the ENTER/EXIT barcode
above, then the barcode at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character
$CC9L1
~