User Manual

Enter/Exit Programming Mode Industrial 2 of 5
172 RIDA™ DBT6400
Industrial 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for Industrial 2 of 5 Length
Control on page 171. Length 1 is the minimum label length if in Variable Length
on page 171 Mode, or the first fixed length if in Fixed Length on page 171
Mode. Length includes the barcode’s
check and data characters.
The length can be set from 1 to 50 characters. See "Set Length 1" on page 248
for more detailed programming in
structions.
Select Industrial 2 of 5 Set Length 1 Setting
To configure this feature, scan the ENTER/EXIT barcode
above, then the barcode at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character
$CU2L1
~