User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 161
ABC Codabar Dynamic Concatenation Timeout
This parameter specifies the timeout in 10-millisecond ticks used by the ABC
Codabar Dynamic Concatenation Mode. The timeout can be set within a range
of 05 to 255 in 10ms increments. A setting of zero specifies no delay.
Select ABC Codabar Dynamic Concatenation
Timeout Setting
To configure this feature, scan the ENTER/EXIT bar-
code above, then the barcode at left followed by digits
from
the Alphanumeric characters in
Appendix D,
Keypad representing your desired character(s). End
by scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
14 (0x14) = Quiet Interval of 200 ms
ABC Codabar Force Concatenation
Forces labels starting or ending with D to be concatenated.
DEFAULT
ABC Codabar Force Concatenation = Disable
ABC Codabar Force Concatenation = Enable
$CCBDT
~
$CCBFC00
$CCBFC01