User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 159
Codabar Set Length 2
This feature specifies one of the barcode lengths for Codabar Length Control
on page 157. Length 2 is the maximum label length if in Variable Length on
page 157 Mode, or the second fi
xed length if in Fixed Length on page 157
Mode. The length includes the barcode’s start, stop, check and data characters.
T
he length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to
ig
nore this length (only one fixed length). See "Set Length 2" on
page 249 for
more detailed progr
amming instructions.
Select Codabar Length 2 Setting
To configure this feature, scan the ENTER/EXIT barcode
above, then the barcode at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
$CCBL2
~