User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 151
Datalogic 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for Datalogic 2 of 5 Length
Control on page 150. Length 1 is the minimum label length if in Variable Length
on page 150 Mode, or the first fixed length if in Fixed Length on page 150
Mode. The length includes the barcode’s data characters only.
The length can be set from 2 to 50 characters in increments of one. See "Set
Length 1" on
page 248 for more detailed programming instructions.
Select Datalogic 2 of 5 Length 1 Setting
To configure this feature, scan the ENTER/EXIT barcode
above, then the barcode at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
06 = Length 1 is 6 Characters
$CD2L1
~