User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 147
I 2 of 5 Set Length 2
This feature specifies one of the barcode lengths for I 2 of 5 Length Control on
page 145. Length 2 is the maximum label length if in Variable Length on page
145 Mode, or the second fixed le
ngth if in Fixed Length on page 145 Mode. The
length includes the barcode’s check and data characters.
The length can be set from 2 to 50 characte
rs. A setting of 0 specifies to ignore
this length (only one fixed length). See "Set Length 2" on
page 249 for more
detailed programming instructions.
Select I 2 of 5 Length 2 Setting
To configure this feature, scan the ENTER/EXIT barcode
above, then the barcode at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
$CI2L2
~