User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 131
Code 39 Set Length 1
This feature specifies one of the barcode lengths for Code 39 Length Control on
page 130. Length 1 is the minimum
label length if in Variable Length on page
130 Mode, or the first fi
xed length if in Fixed Length on page 130 Mode. Length
includes the barcode’s check, data, and full-ASCII shift characters. The length
doe
s not include start/stop characters.
The length can be set from 0 to 50 characters. See "Set Length 1" on page 248
for more detailed programming instructions.
Select Code 39 Set Length 1 Setting
To configure this feature, scan the ENTER/EXIT barcode
above, then the barcode at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
02 = Length 1 is 2 Characters
$CC3L1
~